BMSXJ - G392 SILICONE GREASE

Product Identification

Product ID:G392 SILICONE GREASE
MSDS Date:01/04/1990
FSC:9150
NIIN:00-735-1800
MSDS Number: BMSXJ

Responsible Party
GENERAL ELECTRIC CO., SILICONE PRODUCT DIV.
HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: D.A.POLSINELLI

Cage: 01139

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 30-60%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293


DIMETHYL DIPHENYL POLYSILOXANE

CAS: 68083-14-7

Fraction By Weight: 60-80%

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT AVAILABLE
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE MILDLY IRRITATING. LOW LEVEL OF
TOXICITY(INGESTED)
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE:POSSIBLE IRRITATION. SKIN:POSSIBLE
IRRITATION, IN SENSITIVE INDIVIDUALS. INHALED:UNLIKELY EXPOSURE,
ONLY IN UNUSUAL SITUATIONS WILL THE PRODUCT FORM A DUST OR MIST.
INGESTED: NONE KNOWN.
Medical Cond Aggravated by Exposure:IF DUST OR MIST IS FORMED:
RESPIRATORY AILMENTS, PNEUMONICOSIS.

First Aid

First Aid:EYE: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP & WATER.
INHALED:REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH WITH WATER
SEVERAL TIMES.

Fire Fighting

Extinguishing Media:PRODUCT IS NON FLAMMABLE. EXTINGUISH FIRE WITH
MEDIA APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE GIVEN BY MANUFACTURER (SUPPLIER).

Accidental Release

Spill Release Procedures:SCOOP UP EXCESS GREASE USING INERT MATERIAL.
CLEAN AREA WITH SOAP & WATER TO PREVENT SLIPPING HAZARD.
Neutralizing Agent:NONE.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH SKIN & EYES.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NONE KNOWN
Ventilation:NONE KNOWN
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:NONE KNOWN
Work Hygienic Practices:NONE GIVEN BY MANUFACTURER (SUPPLIER).
Supplemental Safety and Health
NONE

Chemical Properties

HCC:V6
Spec Gravity:1.30
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREY ODORLESS SOLID

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:(CARBON MONOXIDE & CARBON DIOXIDE).

Disposal

Waste Disposal Methods:DISPOSE OF IN AN APPROPRIATE DISPOSAL FACILITY
I/A/W FEDERAL,STATE,LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.